Filter
Top Products
10-35
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 10 Editing and Deploying Configurations Using Config Editor
Scheduling a Job
Failure Policy Specify what the job
should do if it fails to
run on the device.
• Select Ignore Failure and Continue from the drop-down list box to
continue the job and make configuration changes to the remaining devices,
configured by the job
Or
• Select Stop on Failure to stop making changes to the remaining devices.
Execution Mode in which the job
is executed. There are
two options, Parallel
and Sequential.
1. Select Parallel to run the job on multiple devices at same time
Or
Select Sequential to run the job one device at a time.
2. Click Device Order.
The Set Device Order dialog box appears.
3. Use the Up and Down arrows to move a device up or down.
4. Click Done.
Download Mode Mode in which the
configuration file is
downloaded. The two
modes are Overwrite
and Merge.
Do either of the following:
• Select the Overwrite option, if you want to replace the existing running
configuration on the device, with the selected configuration.
This is the default option for the configuration deployment.
The configuration that you have selected is compared with the latest
running configuration in the Configuration Archive. (RME assumes that the
latest running configuration in the archive is the same as the configuration
currently running on the device.)
The Overwrite mode ensures that the running configuration on the device
is overwritten with the selected configuration. This means, after the
configuration is successfully deployed, the selected configuration and the
running configuration on the device are the same.
Overwrite mode supports only Write2Run of the configuration.
Or
• Select the Merge option, if you want to add incremental configuration to
the device.
The configuration that you have selected is deployed on to the device as is.
This means, the existing running configuration of the device is updated
incrementally with the commands in the selected configuration.
The selected running configuration is not compared with the running
configuration in the Configuration Archive.
We recommend that you use this option on newly deployed devices. This is
because, the Merge option effectively deploys the entire configuration from
the archive, on to the device.
Merge mode supports both Write2Run and Write2Start of the
configuration.
Field Description/Action Usage Notes