Filter
Top Products
9-43
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
For each device category, click on Applicable Devices to view the devices in your selection, to which
this task applies.
HTTP Server Task
You can use HTTP Sever to configure HTTP access on IOS devices which have been configured for VPN
functionality.
The following device categories are supported by this task:
• IOS (including Cable devices)
• Catalyst OS
For more details, see Table 9-3.
You can enter the details of this task in the HTTP Server Configuration dialog box. (To invoke this dialog
box, see
Starting a New NetConfig Job.)
For the features of system-defined tasks and a description of the features of a system-defined task dialog
box, see
Understanding the System-defined Task User Interface (Dialog Box).
The fields in the HTTP Server Configuration dialog box are:
Encrypted Select this option to encrypt the password.
CatOS Parameters Password Apply Command on Modules Select to apply the command on the modules.
If you have selected Disable as the action in
the Common Parameters group, then the
password will be removed.
PIX Parameters Level(0-15) Set the password level. The level can be
between 0 and 15. 15 is the default level.
Encrypted (Password should be
16 characters)
Select this option if the password you are
entering is already encrypted. If you select this
option ensure that your password is 16
characters.
Group Sub-group Field Description
Group Sub-group Field Description
Common
Parameters
Server Action Select an option to enable, disable or make no change to the
HTTP access on the device.
Port Number [0-65535] Specify the HTTP server port number.
Set to Default Select this option to set the default port (80).
IOS Parameters Authentication Action Select an option to enable, disable or make no change to the
authentication method.