Filter
Top Products
12-90
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 12 Managing Software Images Using Software Management
Using Software Management Job Browser
Step 4 Click Next.
Continue entering the information for this job as you would for a new distribution. This depend on what
you selected earlier in the Distribution Method window:
• Distributing by Devices [Basic]
• Distributing by Devices [Advanced]
• Distributing by Images
• Remote Staging and Distribution
Stopping a Job
You can stop only jobs that are either in the Pending or the Running status.
The job stops only after the current task is complete. During this time, the Software Management Job
Browser window displays the job status as Running.
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
To stop a job:
Step 1 Select Resource Manager Essentials > Software Mgmt > Software Mgmt Jobs.
The Software Management Job Browser dialog box appears.
Step 2 Select either a pending or a running job.
Step 3 Click Stop.
A confirmation box shows that the selected job will be stopped.
Step 4 Click OK.
A message appears that the selected job has been stopped.
After the job is stopped, the Pending job status changes to Stopped. The Running job status changes
temporarily to Stop Initiated and then to Stopped.
Field Description
Device Name of the device
Module Device module
Pre-upgrade Image Image name which was running before the upgrade.
Post-upgrade Image Image name after completing the upgrade.
Running Image Image name that is currently running on the image.
Errors Click on the underlined Error message to review the
details.