Filter
Top Products
12-21
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 12 Managing Software Images Using Software Management
Software Repository
The images that you have added appear in the Images to be Added table. This table contains this
information:
• Devices/Platforms—Name of the device or platform.
• Version—Software version that you have selected.
• Subset—Subset image information.
Step 8 Click Next when the list contains all image combinations to download.
Software Management verifies that the images in the Image list run in the selected devices and displays
the status in the Add Images from Cisco.com dialog box. The Add Images from Cisco.com dialog box
contains:
Step 9 Select the images to add to the image repository in the Add Images from Cisco.com dialog box and click
Next.
The Job Control Information dialog box appears.
Step 10 Enter the following in the Job Control Information dialog box:
Field Description
Device/Platform Lists the device details that you have selected.
Selected Version and Subset Displays the image details.
Image Requirements Displays the required hardware (RAM and Flash) details.
Download Select the image you want to download.
By default, the check boxes are selected for the images that
have passed the verification.
You can choose not to add an image by deselecting that
check box.
Pass/Fail Results of image verification.
• Pass—Device has the minimum required memory and
Flash memory.
• Fail—Device does not have enough memory or Flash
memory.
Images that fail verification on one device could work on
another. Therefore, you can download a failed image by
selecting the Download check box.
Field Description
Scheduling
Run Type You can specify when you want to run the Image Import (from Cisco.com) job.
To do this, select one of these options from the drop-down menu:
• Immediate—Runs this job immediately.
• Once—Runs this job once at the specified date and time.
Date If you have selected Once for Run Type, select the date and time (hours and minutes) to
schedule.