Filter
Top Products
9-9
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Starting a New NetConfig Job
Step 10 Set the job options, in the Job Options pane.
Approver Comments Enter comments for the job approver. This field is displayed only if you have enabled job
approval for NetConfig. For more details the section
Enabling Approval and Approving
Jobs Using Job Approval.
Maker E-mail Enter the e-mail-id of the job creator. This field is displayed only if you have enabled job
approval for NetConfig. This is a mandatory field. For more details the section
Enabling
Approval and Approving Jobs Using Job Approval.
Field Description
Fail on Mismatch of Config
Vers io ns
Select to cause job to be considered a failure when the most recent configuration version
in the configuration archive is not identical to the most recent configuration version that
was in the configuration archive when you created the job.
Sync Archive before Job
Execution
Select to cause job to archive running configuration before making configuration
changes.
Copy Running Config to Startup Select to cause job to write the running configuration to the startup configuration on each
device after configuration changes are made successfully.
Does not apply to Catalyst OS devices.
Enable Job Password
Login Username Enter the Login Username. This option is available to you if you have set the appropriate
job password policy in the Configuration Management module.
This overrides the credentials that you have entered at the time of adding the device in
the Device and Credentials Administration module of Common Services.
Login Password Enter the job password. This option is available to you if you have set the appropriate job
password policy in the Configuration Management module.
This overrides the credentials that you have entered at the time of adding the device in
the Device and Credentials Administration module of Common Services.
Enable Password Enter the Enable password. This option is available to you if you have set the appropriate
job password policy in the Configuration Management module.
This overrides the credentials that you have entered at the time of adding the device in
the Device and Credentials Administration module of Common Services.
Field Description