Filter
Top Products
11-25
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Launching show Commands From Device Center
Field Description
Scheduling
Run Type The Run Type of the job. The Run Types could be any or all of these, depending on the type of the job:
• Immediate—Runs the job immediately.
• Once—Runs the job once at the specified date and time.
• 6 - hourly—Runs the job every 6 hours, starting from the specified time.
• 12 - hourly—Runs the job every 12 hours, starting from the specified time.
• Daily—Runs daily at the specified time.
• Weekly—Runs weekly on the day of the week and at the specified time.
• Monthly—Runs monthly on the day of the month and at the specified time.
• Last day of Month—Runs on the last day of the month at the specified time.
The subsequent instances of periodic jobs will run only after the earlier instance of the job is complete.
For example, if you have scheduled a daily job at 10:00 a.m. on November 1, the next instance of this job
will run at 10:00 a.m. on November 2 only if the earlier instance of the November 1 job has completed.
If the 10.00 a.m. November 1 job has not completed before 10:00 a.m. November 2, the next job will start
only at 10:00 a.m. on November 3.
To change, select the required run type from the drop-down list.
Date Scheduled date and time of the job.
Job Information
Job Description Enter a description for the job. This is mandatory. You can enter only alphanumeric characters.
E-mail Enter e-mail addresses to which the job sends messages at the beginning and at the end of the job.
You can enter multiple e-mail addresses; separate these addresses by commas.
Configure the SMTP server to send e-mails in the View / Edit System Preferences dialog box (Common
Services > Server > Admin > System Preferences).
We recommend that you configure the CiscoWorks E-mail ID in the View / Edit System Preferences dialog
box (Common Services > Server > Admin > System Preferences). When the job starts or completes, an
e-mail is sent with the CiscoWorks E-mail ID as the sender's address.
Comments Enter your comments for the job. Comments appear in the Job Work Order.
Job Options
Enable Job
Password
• If you have enabled the Enable Job Password option and disabled the User Configurable option in the
Job Policy dialog box (Resource Manager Essentials > Admin > Config Mgmt > Config Job Policies)
enter the device login user name and password and Device Enable password.
• If you have enabled the Enable Job Password option and enabled the User Configurable option in the
Job Policy dialog box (Resource Manager Essentials > Admin > Config Mgmt > Config Job Policies)
either:
–
Enter the device login user name and password and Device Enable password.
Or
–
Disable the Job Password option in the Job Schedule and Options dialog box.