Filter
Top Products
8-17
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Configuring Default Job Policies
Step 4 Click Apply.
A message appears, Policy values changed successfully.
Step 5 Click OK.
Usage Scenarios When Job Password is Configured on Devices
The following tables list the usage scenarios and their implications for Configuration application when
job password is configured on devices.
• Table 8-1When Device Access is Only Through Job Password and No Access is Available Through
Regular Telnet/SSH and SNMP (Read or Write)
• Table 8-2When Devices are Configured for Job Password and Access is Available Through SNMP
(Read or Write)
• Table 8-3When Devices are not Configured for Job Password and Access is Available Through
Regular Telnet/SSH but no SNMP
• Table 8-4When Devices are not Configured for Job Password and Regular Telnet/SSH is Disabled.
Access is Available Only Through SNMP (Read or Write)
Execution Policy
This appears for all the
applications in the
dropdown list.
Allows you to configure the job to run on
multiple devices at the same time (Parallel
execution) or in sequence (Sequential
Execution).
If you select sequential execution, you can select
Device Order in the Job Schedule and Options dialog
box to set the order of the device.
1. Select a device in the Set Device Order dialog box.
2. Either:
• Click the Move Up or Move Down arrows to
change its place in the order. Click Done to save
the current order.
Or
• Close the dialog box without making any changes.
You cannot alter the device sequence for Archive
Management application jobs such as Sync Archive,
Check Compliance and Deploy, etc.
Sequential Execution is not supported for the following
jobs:
• Manual Sync Archive
• Periodic Config Collection and Polling
• cwcli config get
User Configurable Select this check box next to any field to
make corresponding policy user
configurable.
You can configure a user-configurable policy while
defining job. You cannot modify non-user-configurable
policies.
Field Name Description Usage Notes