Filter
Top Products
14-24
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 14 Enabling and Tracking Syslogs Using Syslog Analyzer and Collector
Defining Custom Report Templates
Public templates can be seen and used by other users who have the permissions to do these tasks. Private
templates can be seen and used by only owner (creator) of the templates.
Using the Syslog custom report template dialog box, you can do the following tasks:
Step 7 Click Finish.
A confirmation message appears that the report has been successfully created.
Your custom report template is displayed in the dialog box on the Custom Templates page (Resource
Manager Essentials > Reports > Custom Templates).
To run the report, see Running a Custom Report.
Adding a Message Type
To add a message type:
Step 1 Click Add in the Define New Message Type section of your dialog box.
The Define New Message Type dialog box appears.
Step 2 Enter the required information:
Task Button
Add a message type (see Adding a Message Type.) Use the Add button.
Edit a message type (see Editing a Message Type.) Use the Edit button.
Delete a message type (see Deleting a Message Type.) Use the Delete button.
Select a message type from a set of standard messages (see Selecting a Message Type.) Use the Select button.
Column Description
Facility Enter the codes for the facilities you want reported. A facility is a hardware device, a protocol, or a
module of the system software. See the Cisco IOS reference manual, System Error Messages, for a
predefined list of system facility codes.
Each code can consist of two or more uppercase letters. You can enter several facility codes, separated
by commas, for example, SYS,ENV,LINK.
If you do not enter any facility but use the asterisk, all the facilities will be reported.
Sub-Facility Enter the codes for the sub-facilities you want reported. Sub-Facility is the subfacility in the device
that generated the Syslog message.
An example of an entry in this field is CCM_CDR_INSERT-GENERIC-0-OutOfMemory. This is an
optional field.
If you do not enter any sub-facility but use the asterisk, all the sub- facilities will be reported.