Filter
Top Products
8-45
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Configuration Quick Deploy
Step 3 Click Submit.
An immediate Quick Deploy of Configuration on Device job will be scheduled.
A message appears, Job ID is created successfully.
Field Description
Job Information
E-mail Enter e-mail addresses to which the job sends messages at the beginning and at the end of the job.
You can enter multiple e-mail addresses separated by commas.
Configure the SMTP server to send e-mails in the View / Edit System Preferences dialog box
(Common Services > Server > Admin > System Preferences).
We recommend that you configure the CiscoWorks E-mail ID in the View / Edit System
Preferences dialog box (Common Services > Server > Admin > System Preferences). When the
job starts or completes, an e-mail is sent with the CiscoWorks E-mail ID as the sender's address.
Job Options
Job Password • If you have enabled the Enable Job Password option and disabled the User Configurable
option in the Job Policy dialog box (Resource Manager Essentials > Admin > Config Mgmt
> Config Job Policies) enter the device login user name and password and device Enable
password.
• If you have enabled the Enable Job Password option and enabled the User Configurable
option in the Job Policy dialog box (Resource Manager Essentials > Admin > Config Mgmt
> Config Job Policies) either:
–
Enter the device login user name and password and device Enable password
or
–
Disable the Job Password option in the Job Schedule and Options dialog box.
Deploy Mode
Overwrite Select the Overwrite option, if you want to replace the existing running configuration on the
device, with the selected configuration.
This is the default option for the configuration deployment.
The configuration that you have selected is compared with the latest running configuration in the
Configuration Archive. (RME assumes that the latest running configuration in the archive is the
same as the configuration currently running on the device.)
The Overwrite mode ensures that the running configuration on the device is overwritten with the
selected configuration. This means, after the configuration is successfully deployed, the selected
configuration and the running configuration on the device are the same.
Merge Select the Merge option, if you want to add incremental configuration to the device.
The configuration that you have selected is deployed on to the device as is. This means, the
existing running configuration of the device is updated incrementally with the commands in the
selected configuration.
The selected running configuration is not compared with the running configuration in the
Configuration Archive.
We recommend that you use this option on newly deployed devices. This is because, the Merge
option effectively deploys the entire configuration from the archive, on to the device.