Filter
Top Products
9-83
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
Interleave Depth Interleave Depth Allows you to select the interleave depth of a channel
between 8 - 128. The default is 32.
Specify the interleave depth by selecting the appropriate
option from the drop-down list.
Remove Select to remove the interleave depth configuration.
Framing Format MPEG Framing Format Select the MPEG framing format from the drop-down list.
The options are:
• No Change—Does not allow modification of any fields
in this sub-group of fields.
• Annex A—For Cisco uBR-MC16E cable interface card
and Cisco uBR7111E and Cisco uBR7114E Universal
Broadband Routers.
• Annex B—For all other Cisco cable interface cards.
Remove Select to remove a previously-specified MPEG framing
format configuration.
Modulation Modulation Sets the modulation for a downstream port on a cable
interface.
Select the required option. The options are:
• No Change—Does not allow modification of any fields
in this sub-group of fields.
• 64 qam
• 256 qam
Remove Select to remove a previously-specified modulation
configuration.
Channel Channel ID (0-255): Channel-ID can be from 0-255. Specify the channel-ID.
Remove Select to remove the Channel ID.
Frequency Frequency (54-858 MHz) Frequency range can be from
54MHz -1,000MHz. Enter the frequency.
Remove Select to remove a previously-specified frequency range.
Traffic Shaping Rate Limit Select the required option from the drop-down list. The
options are:
• No Change—Does not allow modification of any fields
in this group of fields.
• Enable—Enables this option.
• Disable—Disables this option.
Group Sub-Group Field Description