Filter
Top Products
21-7
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 21 Setting System-wide Parameters Using System Preferences
RME Device Attributes
You can enter non-negative full day values only. You cannot enter fractions of days.
Step 4 Click OK.
The Purge Job Details window appears displaying the purged job details.
Note You cannot purge the jobs that are in the running state.
RME Device Attributes
This option enables you to set the default values for device attributes. These values are applicable to all
devices in RME. The RME device attributes are:
• SNMP Retry—Number of times that the system should try to access devices with SNMP options.
The default value is 2. The minimum value is zero and the maximum value is 6.
• SNMP Timeout—Amount of time that the system should wait for a device to respond before it tries
to access it again.
The default value is 2 seconds and the minimum value is zero seconds. There is no maximum value
limit. Changing the SNMP timeout value affects inventory collection.
• Telnet Timeout—Amount of time that the system should wait for a device to respond before it tries
to access it again.
The default value is 36 seconds and the minimum value is zero seconds. There is no maximum value
limit.
Changing the telnet timeout value affects inventory collection.
• Natted RME IP Address—The RME server ID. This is the translated address of RME server as seen
from the network where the device resides.
You need to enable support for NAT, in a scenario where RME tries to contact devices outside the
NAT boundary.
The default value is Not Available.
• TFTP Timeout—Amount of time that the system should wait for a device to respond before it tries
to access it again.
The default value is 5 and the minimum value is 0 seconds. There is no maximum value limit.
To edit the RME device attributes:
Step 1 Select Resource Manager Essentials > Admin > System Preferences > RME Device Attributes.
The RME Device Attributes dialog box appears.
Step 2 Enter the default values for:
• SNMP Retry
• SNMP Timeout
• Telnet Timeout
• Natted RME IP Address