Filter
Top Products
19-34
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 19 CLI Utilities
CWCLI
[ -policyfile
policy_filename ]
Defines job policies using a job
policy file.
You can specify job policies using
combination of -
policyfile
argument and other optional
arguments,
However, you can specify each
argument only once in command.
policy_filename is path to job
policy file. Can be a full pathname
or filename in local directory.
[-makercomments : “maker
comments” ]
Comments from the job creator, to
the job approvers, if job approval is
enabled for the job.
Enter your comments within
quotes.
[-mkemail : maker email id ] E-mail ID of the job creator, for
approval notifications, if approval
is enabled for the job.
None
[-execution:
Sequential|Parallel ]
Configures the job execution
property, whether the jobs should
be run sequentially or in parallel.
None.
[-startup ]: Copy running
config to startup policy
Select to cause the configuration
job to write the running
configuration to the startup
configuration on each device after
configuration changes are made
successfully.
None.
[-version] : Fail on
mismatch of Config Versions.
Select to cause the job to be
considered a failure when the most
recent configuration version in the
Configuration Archive is not the
same as the configuration that was
running when you created the job.
-sync argument should be
provided if this policy is selected.
This argument causes the job to
archive the running configuration
before making configuration
changes.
[-email : Job Notification
email ids ]
Specify the email addresses to
which the configuration job will
send status notices.
Separate multiple addresses with
commas.
[-sync ] : Synch
configuration archive before
deploy
Select to cause the job to archive
the running configuration before
making configuration changes.
None.
[-failure: “Stop on
failure” | “Ignore
failure and continue” |
“Rollback device and
stop” | “Rollback device
and continue” | “Rollback
job on failure”
]
Select what the job should do if it
fails to run on a device.
Ensure that you place your selected
value within quotes.
[{-primary_user : Primary
User name
-primary_pass :
“Primary password” }]
Primary username for connecting
to the device.
Primary password for connecting
to the device.
Enter the primary password within
quotes.
Sub Command Command Argument Description Usage Notes