Filter
Top Products
A-97
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
Job Approval
Job Approval
This section provides the troubleshooting information for the Job Approval application:
SLCA0130 {0}
4
location does not have
permissions to create files
for backing up data.
None. Give write permissions or change the
location and try again.
SLCA0131 There are more than {0}
5
records generated for this
date range.
Only {0}
5.
records are being
displayed, starting with the
records generated on the end
date.
None. To view the complete report, schedule a
job that does not have Immediate as the
Run Type.
1. Displays the task name, Automater Action or Message Filter
2. Displays the filename.
3. Displays the current date and time
4. Displays the location
5. Displays total number of records
Message ID Error Message Probable Cause Possible Action
Message ID Error Message Probable Cause Possible Action
JBAP0001 Cannot enable approval
for applications that do
not have an
Approver-List assigned
to them
You have attempted to enable
Approval without assigning a
list to the application.
Go to the Approval > AssignLists
screen and assign a list to the
application.
Enable Approval again.
JBAP0002 Specify a valid E-mail
address.
You have entered an invalid
E-mail-address.
Enter a valid E-mail address
JBAP0003 Select at least one job. You have attempted to perform
an action on a job without
selecting a job
Select a job before performing an action
on it.
JBAP0004 Select only one job. You have attempted to view
JobDetails, with more than one
job selected
Select only one job.
JBAP0005 List {0} has no users.
To save the list
successfully, add users
and click Save
This is not an error. This is an
Information message when you
adda list for the first time.
Add users before saving the list
JBAP0006 {0} is not a valid
Approver.
Enter a user with
Approver role
You have attempted to add a user
who has not been added as
Approver in CMF.
You must first add the user as Approver
into CMF. Only then can you add this
user into RME.
JBAP0007 Select an Approver, to
change E-mail.
You are trying to do a 'Save'
without selecting a user.
Go back and select a user.