Filter
Top Products
A-86
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
Software Management
SWIM1161 RXBOOT credentials are
not configured for the
device. If TACACS is used
by the device, configure
RXBOOT Mode
credentials in the
credentials repository.
This will be used to contact
the device in RXBOOT
Mode (if configured) for
Run From Flash (RFF)
devices.
RXBOOT credentials are not
configured for the device in
Device Credentials
Repository (DCR).
This will be used for Run
From Flash (RFF) devices
when connecting in RX boot
mode.
If TACACS is used by the device, configure
RXBOOT Mode credentials in the Device
credentials repository.
SWIM1162 Error when recommending
image for the device.
Swim recommends the image
based on device ROM, RAM
and Flash which it collects
from RME Inventory module.
If the device is having a faulty
hardware (FLASH) then this
will not be available in
inventory.
Check the Inventory Detailed Device Report
to ensure that Inventory data exists for the
device (like Flash Partition size).
If not, check the device for a faulty hardware
or a bug in device software.
SWIM1163 Image Import from Device
failed because of some
unexpected error.
None. Please contact Cisco TAC with the Job logs
available under:
Windows:
NMSROOT\CSCOpx\files\rme\jobs\swim\
JobID
Solaris:
/var/adm/CSCOpx/files/rme/jobs/swim/Job
ID
SWIM1164 Image Distribute to Device
failed because of some
unexpected error.
None. Please contact Cisco TAC with the Job logs
available under:
Windows:
NMSROOT\CSCOpx\files\rme\jobs\swim\
JobID
Solaris:
/var/adm/CSCOpx/files/rme/jobs/swim/Job
ID
Message-ID Error Message Probable Cause Possible Action