Filter
Top Products
A-29
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
NetConfig
NetConfig FAQs
Q.What are the supported protocols for NetConfig Reload task?
Q.
What are the supported protocols for NetConfig Reload task?
A.
The supported protocols for NetConfig Reload task are Telnet, SSH and TFTP.
SSH and TFTP protocols are supported by NetConfig Reload task only if these protocols are also
supported by the devices.
Troubleshooting NetConfig
This section provides the troubleshooting information for the NetConfig application:
Message ID Error Message Probable Cause Possible Action
CFG0025 Cannot retry. Retry is not supported on
periodic jobs.
None.
CFG0026 You can retry only failed
jobs.
A Successful job has been
selected instead of a
Failed job.
Select a Failed job and try again.
CFG0029 Job approval is enabled. You have scheduled a job
that requires Job approval
with the Immediate
schedule type.
The job will run only
when it has been approved
by the Approver.
Do not select Immediate job type while
scheduling the job.
CFG0009 Error occured while
processing.
Check netconfigclient.log
for more details.
Retry the operation. If the problem persists,
send the logs to Cisco Technical Assistance
Center (TAC).
The netconfig logs are available at this
location:
On Windows:
NMSROOT\log\netconfigclient.log
On Solaris:
/var/adm/CSCOpx/log/netconfigclient.log
CFG0029 Job approval is enabled. This job requires job
approval. So it can run
only when the job is
approved. So you cannot
schedule a job with
immediate schedule type.
Do not select Immediate schedule type.
CFG0041 You have selected an
instance that does not
have a task associated
with it.
None. Select an instance that has an associated task.