Filter
Top Products
10-39
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 10 Editing and Deploying Configurations Using Config Editor
Viewing the Status of all Deployed Jobs
Complete the following prerequisite steps of the job definition process:
1. Start a new download job.
2. Select configs.
3. Configure job properties.
4. Set job approvers, if Job Approval is enabled.
To review the work order:
Step 1 Review the information in the Work Order dialog box.
The fields in this dialog box are:
• To modify the job, return to any previous dialog box and change the information.
• To return to a previous dialog box, click Back until the dialog box appears.
Step 2 Click Finish in the Work Order dialog box to register the job.
Viewing the Status of all Deployed Jobs
You can use this feature to view the status of all pending, running, and completed jobs. You can create
a new job or edit, copy, stop and delete a job that you have opened.
You can only Edit one job at a time while you can Stop or Delete multiple jobs at a time.
To view all the downloaded jobs:
Step 1 Select RME > Config Mgmt > Config Editor > Config Editor Jobs.
The List of Deploy Jobs window appears with the list of all the jobs.
Field Description
General Info Detailed information about the job, such as owner, description and
schedule.
Job Approval Info Status of approval.
Job Policies Policies configured for the job. Edit in Job Properties dialog box.
Devices Devices on which the job will run. Edit in Device Selector dialog box.
Device Commands Commands that the job will run.
Username Username of the job owner.