Filter
Top Products
9-74
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
At the time of enabling login authentication or enable mode authentication, it is mandatory for you to
enter the username and password.
IOS Parameters
Enable mode
Authentication
Action Select to enable, disable, or make no change to the enable mode
authenticating.
Also see .
Credentials Password Enter the enable password.
Verify Re-enter the enable password.
List Name Enter default or named list.
Set to Default Select the set the default list.
Type (Drop-down list
1)
Select the required option:
• No Choice
• radius
• tacacs+
• line
• enable
• local
• none
Similarly, select the type from the other three drop-down lists.
New Model Action Select to enable, disable, or make no change to new model state.
CatOS
Parameters
Enable mode
Authentication
Action Select to add, remove, or make no change to the enable mode
authentication.
Credentials Password Enter the enable password.
Verify Re-enter the enable password.
Server Options Primary Click to designate specified server as primary TACACS server.
All Click to clear all hosts from list of TACACS servers, if you selected
remove in Action field.
ContentEngine
Parameters
Server Option Primary Select to specify the server as primary.
Password
Option
ASCII Password Select for an ACSII password.
Connection
Options
Timeout Enter the timeout value.
Retries Enter the number of re-tries.
NAM Parameters No category-specific commands
Note The TACACS Server Key should be DES encrypted NAM
devices.
Group Sub-group Field Description