Filter
Top Products
19-109
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 19 CLI Utilities
.syslogConf.pl Utility
/var/adm/CSCOpx/log/SyslogConf.log
In Windows
NMSROOT\log\SyslogConf.log
Note Before you run the syslogConf.pl script, ensure that the Daemon Manager is stopped.
Running the syslogConf.pl Script
To run the script:
Step 1 Go to the command prompt and enter:
NMSROOT/bin/perl NMSROOT/syslogConf.pl
When you run this syslogConf.pl script, a message appears with five options.
[1] Change Syslog Analyzer Port
[2] Change Syslog Collector Port
[3] Configure Remote Syslog Collector(RSAC) Address and Port
[4] Change Syslog File Location
[Q] Quit
Enter Your Choice:
Step 2 Enter your choice.
• If you enter 1 the following message is displayed with the old Syslog Analyser Port number. You
are also prompted to enter the new port number for the Syslog Analyser.
INFO: You have opted to change Local Syslog Analyser port.
Old Syslog Analyser Port :xxxx
Enter new Syslog Analyser port:
For example, you can change the Syslog Analyser Port from 4444 to 2222.
After providing the new port information, the following message is displayed.
INFO:Local Syslog Analyser port has been changed from 4444 to 2222 successfully
• If you enter 2 the following message is displayed with the old Syslog Collector Port number. You
are also prompted to enter the new port number for the Syslog Collector.
INFO: You have opted to change Local Syslog Collector port.
Old Syslog Collector Port :xxxx
Enter new Syslog Collector port:
For example you can change the Syslog Collector Port from 1111 to 3333.
After providing the new port information, the following message is displayed.
INFO:Local Syslog Collector port has been changed from 1111 to 3333 successfully
• If you enter 3, the following message is displayed, with the old Syslog Collector Port number. You
are also prompted to provide the new RSAC Address and the new port number for the Syslog
Collector.
INFO: You have opted to change RSAC port.