Filter
Top Products
10-9
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 10 Editing and Deploying Configurations Using Config Editor
Working With the Configuration Editor
Using User Archive
a. Select RME > Config Mgmt > Config Editor > User Archive to open a configuration file stored
in public work area.
The User Archived Configs window appears.
b. Select the configuration and click Edit.
Using Device Center
a. In the CiscoWorks LMS Portal home page, select Device Troubleshooting > Device Center.
The Device Center dialog box appears.
b. Select a device using device selector.
The functions available appears.
c. Select Management tasks > Edit config
The Editor window appears.
Step 3 Edit the credential commands in the raw or processed mode. See Processed Mode and Raw Mode.
Step 4 Select any of the following:
• Save to save changes to the configuration file. See Saving a Configuration File.
• Save As to save changes to the configuration file to a specified location.
• Undo All to undo editing or typing changes. See Undoing All.
• Replace All to replace a string in the opened configuration files. See Replacing All.
• Tools... to launch the Config Editor tools. See Selecting Configuration Tools.
• Close to close the Config Editor window. See Closing a Configuration File.
Processed Mode
The configuration file appears at the configlet level (a set of related configuration commands). The
default is Processed.
In the Processed mode, Editor window is divided into two panes.
• The left pane displays the configuration tree according to the grouping of configlets.
• The right pane displays the commands of configlets in two sections:
–
The lower section, called the credential area contains all the credential commands with the
credentials masked. Click on the encrypted link to modify credentials.
–
The upper section, called the non-credential area contains only non-credential commands. The
non-credential commands are editable.
Raw Mode
The entire file appears as shown in the device. After you open a file in a specific mode, you can view it
only in that mode.
In Raw mode there are two sections for the entire configuration.