Filter
Top Products
3-25
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 3 Adding and Troubleshooting Devices Using Device Management
Working With Suspended Devices
The Pending Devices window (Table 3-3)contains the following pane and button:
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
To suspend the Pending devices:
Step 1 Select Resource Manager Essentials > Devices > Device Management > Pending Devices.
Or
Select Resource Manager Essentials > Devices > Device Management and click on the Number of
Device column entry for the Pending Device State.
The Pending devices dialog box appears.
Step 2 Select the devices.
Step 3 Click Suspend.
A confirmation dialog box appears.
Step 4 Click OK.
You can view the Suspended device list by navigating to Resource Manager Essentials > Devices >
Device Management > Suspended Devices.
Working With Suspended Devices
Suspended device state cannot participate in any RME application flows but all historical data pertaining
to the device will continue to be maintained by RME.
The Suspended Devices window (Table 3-4)contains the following pane and buttons:
Ta b l e 3-3 Pending Devices Window
Pane/Buttons Description
Device Identity
(Pane)
This lists all devices in RME that are in Pending state.
The devices are identified by the Display Name that you have
entered while adding devices to Device and Credential Repository.
Suspend
(Button)
Suspend the Pending state devices.
See To suspend the Pending devices:
This button gets activated only after selecting devices from Device
Identity pane.
Refresh
(Icon)
Click on this icon to refresh the RME device states.