13-17
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 13 Tracking Network Changes Using Change Audit
Using Change Audit Reports
Step 4 Select the required devices using the Device Selector. (See Using RME Device Selector for more
information.)
Step 5 Enter the information required to generate the required report:
Field Description
Date Range
24 Hours Select this option, only if you want to generate a 24 hours report. This report will contain all the
Change Audit data gathered during the last 24 hours.
From Click on the calendar icon and select the start date.
The From field is enabled only if you have de-selected the 24 Hours check box.
To Click on the calendar icon and select the end date.
The To field is enabled only if you have de-selected the 24 Hours check box.
Selection Criteria
User Name Select the user name. This report will be filtered on user names.
Mode Select the connection mode through which the change was made. This report will be filtered on
connection modes.
Category Select the types of the changes.
The supported categories are:
• CONFIG_CHANGE—Configuration changes on the device.
• INVENTORY_CHANGE—Hardware changes on the device.
• SOFTWARE_CHANGE—Software changes on the device.
Application Select the name of the application. This report will be filtered on application names.