Filter
Top Products
9-70
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
For each device category, click on Applicable Devices to view the devices in your selection, to which
this task applies.
SSH Configuration Task
You can use the SSH system-defined task to configure SSH on devices.
The following device categories are supported by this task:
• IOS (including Cable devices)
• Content Engine
• CSS
Size [0-64000] Enter the size of the buffer. Enter a value between 0—64000 bytes.
To sys.log Select the required option to add, remove, or make no change to the
option to log to a file called sys.log.
Logging to
Line
Line Choose this option to send the log activity of a subsystem to an active
CSS session.
Active Session
Name
Enter the name of the active session. Enter a case-sensitive unquoted
text string with a maximum length of 32 characters.
Logging to
Mail
Send Mail Select the required option to add, remove, or make no change to the
e-mail option.
Mail Address Enter the e-mail IDs (comma separated).
SMTP Host
(Name or IP
Address)
Enter the SMTP hostname or the IP address.
Logging Level Select the required logging level from the drop-down list.
Domain Name
(Optional)
Enter the domain name of the SMTP host. This is an optional field.
NAM
Parameters
MIB Threshold Local Select the required option to enable, disable, or make no change to the
local MIB threshold.
Remote Select the required option to enable, disable, or make no change to the
remote MIB threshold.
Voice Local Select the required option to enable, disable, or make no change to the
voice (local).
Remote Select the required option to enable, disable, or make no change to the
voice (remote).
System Local Select the required option to enable, disable, or make no change to
system (local).
Remote Select the required option to enable, disable, or make no change to
system (remote).
Debug System Select the required option to enable, disable, or make no change to
Debug (system).
Group Sub-group Field Description