Filter
Top Products
14-42
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 14 Enabling and Tracking Syslogs Using Syslog Analyzer and Collector
Overview: Syslog Analyzer Reports
An Immediate job displays the first 10,000 lines of a report. For the full report, schedule a job.
Note When you are generating a syslog report, you may get an outofmemory exception. This may occur if the
number of syslog messages that were generated in the Date Range that you specified in the syslog report
job, exceeded six hundred thousand. Specify a shorter Date Range in the Report Generator, and run the
report job again.
To use the Report Generator:
Step 1 Select Resource Manager Essentials > Reports > Report Generator.
The RME Report Generator dialog box appears, in the Report Generator page.
Step 2 Go to the first drop-down list box, select Syslog.
Step 3 Go to the second drop-down list box, select the required report, for example, Custom Summary Report.
Step 4 Select the required devices using the Device Selector.
For details about the Device Selector, see the topic Using RME Device Selector in the section Adding
and Troubleshooting Devices Using Device Management.
Step 5 Enter the information required to generate the required report:
Field Description
Date Range
24 Hours Select this option, only if you want to generate a 24 hour report. This report will contain all the syslog
data gathered during the last 24 hours. For example, if you select this option and schedule the report
to be generated at 6.p.m. the report will have the data of the past 24 hours, from 6 p.m.
From Click on the calendar icon and select the date. The date appears in the dd-mmm-yyyy format in the
From field. For example, 02-Dec-2004.
The From field is enabled only if you have de-selected the 24 Hours check box.
To Click on the calendar icon and select the date. The date appears in the dd-mmm-yyyy format in the To
field. For example, 03-Dec-2004.
The To field is enabled only if you have de-selected the 24 Hours check box.
Scheduling