Filter
Top Products
14-23
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 14 Enabling and Tracking Syslogs Using Syslog Analyzer and Collector
Defining Custom Report Templates
Creating a Custom Report Template
To create a custom report template:
Step 1 Select Resource Manager Essentials > Reports > Custom Report Templates.
The custom templates dialog box appears.
Step 2 Click Create.
The Application Selection dialog box appears.
Step 3 Select Syslog.
Step 4 Click Next.
The Syslog custom report template dialog box appears. The messages that have previously been defined
are displayed here.
The columns in the Syslog custom reports templates dialog box are:
Step 5 Enter a unique name for the custom report template, in the Custom Report Name field.
Step 6 Specify whether you want the custom report template to be Public or Private.
Task Button
Create a custom template (see Creating a Custom Report Template). Create
Editing a custom template (see Editing a Custom Template). Edit
Delete a custom template (see Deleting a Custom Template). Delete
Column Description
Facility Facility is a hardware device, a protocol, or a module of the system software; for example, SYS.
See the Cisco IOS reference manual System Error Messages for a predefined list of facility
codes.
Sub-Facility Sub-Facility is the subfacility in the device that generated the Syslog message. In most cases, this
is blank. An example of an entry in this field is
CCM_CDR_INSERT-GENERIC-0-OutOfMemory.
Severity The severity level for the messages. The following are the severity codes:
0—Emergencies
1—Alerts
2—Critical
3—Errors
4—Warnings
5—Notifications
6—Informational
Mnemonic Code that uniquely identifies the error message. For example, UPLOAD, RELOAD,CONFIG.
Description Description of the Syslog message.