Filter
Top Products
6-49
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 6 Managing Inventory Collection and Polling Using Inventory
Using Inventory Custom Report Templates
This custom report is generated with the FlashFile size and Image version of all selected devices. The
OR condition without criteria means all flash device sizes.
Template Definition Example 6
If your template definition is the following:
Interface:Type:equals:gigabitEthernet
OR:Interface:Type:contains:voiceFXS
This custom report is generated with Interface types of the devices which have interfaces of type
gigabitEthernet or voiceFXS.
Template Definition Example 7
If your template definition has the following rules:
UDF:user_defined_field_2:contains:xyz
OR:Flash Device:Total Flash Device Size (MB):>:45
This custom report is generated with user_defined_field_2 and Total Flash Device Size (MB) for the
devices whose Total Flash Device Size is greater than 45MB or whose user_defined_field_2 value
contains string xyz.
Template Definition Example 8
If your template definition has the following rules:
Chassis:Port Count
AND:IP Address:IP Address
AND:Processor:NVRAM Used (KB)
AND:Processor:Port Count
AND:Processor:RAM Size (MB)
AND:System:Description
AND:Interface:Type
OR:UDF:user_defined_field_2
AND:Flash Partition:Free (KB)
This custom report is generated for all given attributes for the selected devices. If any attribute is not
collected from the device or if the attribute is not applicable for any device “N/A” will be displayed in
the report.
Template Definition Example 9
If your template definition has the following rules:
Memory:Type:equals:Processor Memory
AND:Memory:Type:equals:I/O
This custom report is generated for the devices which have both Processor memory and I/O memory.