Filter
Top Products
9-85
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
Group Sub-Group Field Description
Config Setup Cable Interface Allows you to select cable interfaces for configuration.
Select the cable interfaces from the drop-down list.
Activate/
Deactivate US Port
Activate/Deactiv
ate
Select one of these options from the drop-down list.
The options are:
• No Change—Does not change the existing configuration.
• Shutdown—Deactivates this port.
• No Shutdown—Activates this port.
Frequency Value [5-42
MHz]
Enter the required frequency value in the range 5—42 MHz.
The range for the frequency is:
• 5—65 MHz for Cisco uBR-MC16E cable interface line card
• 5—42 MHz for all other cable interface line cards.
Set to Default Select this option to set the default frequency. A negation
command is generated to remove the frequency value and set the
default.
This is because the default frequency value is dynamic and varies
from device to device.
Power
Configuration
Power Level Value [-10-+25
dBmV]:
Enter the power level.
The valid range for the power level is between
-10dBmV—+25dBmV.
Set to Default Select this option to set the default power level. The default is
0dBmV.
Power Adjustment Continue [2-15
dB]
Enter the power adjustment value.
The valid range for power adjust value between 2dB—15dB.
Set to Default Select this option to set the default power adjustment value. The
default is 2dB.
Noise Enter the power adjust noise level.
The valid range for the power adjustment noise value between 10 -
100%.
Set to Default Select this option to set the default noise value. The default is 30%.
Threshold [0-10
dB]
Enter the power adjustment threshold value.
The valid range for the power adjustment threshold value between
1dB - 10dB.
Set to Default Select this option to set the default power adjustment threshold
value. The default is 1dB.
Admission
Control
Valu e [ 0 -
1000%]
Indicates the maximum cumulative bandwidth reservation allowed
before new CMs are rejected.
The valid range is between 10%—1000%.
Set to Default Select this option to set the default admission control value. The
default value is 100%.