Filter
Top Products
3-28
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 3 Adding and Troubleshooting Devices Using Device Management
Working With Pre-deployed Devices
However, Software Management Distribution By devices [Basic] job fails. This is because the device
inventory data is needed from the device for this task.
For all devices in the pre-deployed state, you can schedule:
• The RME Inventory polling and collection jobs (Resource Manager Essentials > Devices >
Inventory > Inventory Jobs)
• The RME Configuration polling and collection jobs (Resource Manager Essentials > Config
Mgmt > Archive Mgmt > Sync Archive).
If RME succeeds in contacting the device for any of these jobs, the device will be moved to the Normal
state.
See Understanding RME Device State Transition to understand the RME device state transition.
The Pre-Deployed Devices window (Table 3-5) contains the following pane and buttons:
See Diagnosing Pre-deployed Devices section to understand the probable cause for the device to be in
Pre-deployed state and what action that needs to be taken to move the device to the Normal state.
Exporting the Pre-deployed Device Credentials
To export the Pre-deployed device list:
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
Ta b l e 3-5 Pre-Deployed Devices Window
Pane/Buttons Description
Device Identity
(Pane)
This lists all devices in RME that are in Pre-deployed state.
The devices are identified by the Display Name that you have
entered while adding devices to Device and Credential Repository.
Export
(Button)
Export the Pre-deployed state devices.
See Exporting the Pre-deployed Device Credentials.
Suspend
(Button)
Suspend the Pre-deployed state devices
See Suspending the Pre-deployed Devices.
Resubmit
(Button)
Re-submit the Pre-deployed state devices.
See Resubmitting the Pre-deployed Devices.
This button gets activated only after selecting devices from Device
Identity pane.
Delete
(Button)
Delete the Pre-deployed state devices.
See Deleting the Pre-deployed Devices.
This button gets activated only after selecting devices from Device
Identity pane.
Refresh
(Icon)
Click on this icon to refresh the RME device states.