Filter
Top Products
9-78
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
Click Applicable Devices to view the devices to which this task applies.
Use-defined Protocol Task
You can use the User-defined Protocol task to configure the user-defined protocol on NAM devices. This
is a system-defined task.
For more details, see Table 9-3.
You can enter the details of this task in the User-defined Protocol Configuration dialog box. (To invoke
this dialog box, see
Starting a New NetConfig Job.)
For the features of system-defined tasks and a description of the features of a system-defined task dialog
box, see
Understanding the System-defined Task User Interface (Dialog Box).
The fields in the in the User-defined Protocol Configuration dialog box are:
Group Sub-group Field Description
NAM Parameters Web User Action Select an option to add, remove, or make no change
to the web user group of fields.
Username Enter the username of the web user.
Password Enter the password for the username.
Verify Re-enter the password to confirm.
Privileges Account Management Select the required option to enable, disable or
make no change to account management.
System Config Select the required option to enable, disable or
make no change to system configuration.
Capture Select the required option to enable, disable or
make no change to the capture configuration.
Alarm Config Select the required option to enable, disable or
make no change to alarm configuration.
Collection Config Select the required option to enable, disable or
make no change to the collection configuration.
Group Sub-group Field Description
NAM Parameters User Defined
Protocol
Action Select an option to add, remove or replace the
user-defined protocol.
Protocol Select the protocol:
• TCP
• UDP
Port [0 - 65535] Enter the port number. You can enter any port
number in the range of 0—65535.
Name Enter the name of the user-defined protocol.