Cisco Systems 4.1 Dust Collector User Manual


 
A-80
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
Software Management
SWIM1077 Cannot find a Bootflash
partition for the Bootloader
image.
Bootflash partition is not
available for the Bootloader
image.
Insert a read-write Bootflash on the device
and update the inventory.
SWIM1078 System and Bootloader
images are getting
upgraded to the same Flash
partition.
System and Bootloader
images are getting upgraded
to the same Flash partition.
Select individual partitions for both, if
available.
SWIM1079 Image version cannot be
compared.
The image formats of both the
images may not be
compatible for comparison.
Check the format of the version. Select a
different image for upgrading.
SWIM1080 Read-Write partition exists
but you have selected the
ReadOnly partition.
You may have selected Read
only partition instead of Read
- Write partition.
Select the Read-Write partition for
upgrading.
SWIM1081 You have selected the
Compressed System Image
for Run From Flash (RFF)
Upgrade.
Wrong image selected for
Upgrade.
Select the correct image.
SWIM1082 Runtime error while
comparing Modem Image.
Either a wrong modem image
is selected for comparison or
the modem image formats or
not compatible.
Select a different Modem Image for
upgrading.
If the problem persists, send the debug logs to
Cisco Technical Assistance Center (TAC).
The debug logs are available at this location:
On Windows:
NMSROOT\log\swim_debug.log
On Solaris:
/var/adm/CSCOpx/log/swim_debug.log
SWIM1083 Cannot find an image that
is newer and fits in the
Flash.
None. Add another image into software repository
and retry the task.
SWIM1084 Cannot find a Minimum
Flash Requirement for the
device.
The Flash space available on
the device may not be
sufficient for the selected
image.
Check whether the image fits on the device.
SWIM1085 The MinFlash Attribute is
unknown for the selected
image.
The selected image does not
fit on the selected partition.
Check whether the image fits on the selected
partition or select a different image.
SWIM1086 Device not supported. The required device packages
may not be installed on the
server.
Check whether the appropriate device
packages are installed correctly on the server.
Message-ID Error Message Probable Cause Possible Action