9-24
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Creating and Editing User-defined Tasks
Parameters File: More Examples
This section gives more examples of the format of the text to be entered in the CLI Commands body at
the time of creating a User-defined Task, and the commands to be entered in the corresponding
Parameters file.
For example, you can enter these parameters while creating a User-defined task, in the CLI Commands
text box:
ntp server ntpServer
ip http port portValue
ip address ipAddress
In the corresponding Parameters file, which is stored under NMSROOT\files\rme\netconfig\cmdFiles,
(where NMSROOT is the RME install directory) enter:
<GLOBAL>
<CMDPARAM NAME = ntpServer>
<value>10.10.10.10</value>
</CMDPARAM>
<CMDPARAM NAME = portValue>
<value>90</value>
</CMDPARAM>
<CMDPARAM NAME = ipAddress>
<value>1.1.1.1</value>
</CMDPARAM>
</GLOBAL>
<DEVICE NAME = 10.76.38.54>
<CMDPARAM NAME = ntpServer>
<value>20.20.20.20</value>
</CMDPARAM>
<CMDPARAM NAME = portValue>
<value>55</value>
</CMDPARAM>
</DEVICE>
<DEVICE NAME = 10.77.202.229>
<CMDPARAM NAME = ntpServer>
<value>30.30.30.30</value>
</CMDPARAM>
</DEVICE>
In such a case, when the NetConfig job contains the device 10.76.38.54, the following commands are
generated: