Filter
Top Products
9-41
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
For each device category, click on Applicable Devices to view the devices in your selection, to which
this task applies.
Enable Password Task
You can use the Enable Password system-defined, configuration task to change the enable and secret
passwords, which allow users to enter the enable mode on devices.
When you enable or disable an enable password, the change is made on the device and in Device and
Credential Repository.
Note If you disable the enable password on a device, you cannot enter the enable mode on that device unless
you previously enabled an alternative type of enable mode authentication.
The following device categories are supported by this task:
• IOS (including Cable devices)
• Catalyst OS
• PIX OS
For more details, see Table 9-3.
Domain List Enter domain names to complete unqualified hostnames, or add to the
existing list.
Separate multiple domain names with commas.
Do not include an initial period before domain names.
CatOS
Parameters
1st Server Primary Select to make DNS name server entered in Add field, the default or
the primary name server.
Domain Lookup Select an option to enable, disable, or make no change to the domain
lookup.
Content
Engine
Parameters
Serial Lookup Select an option to enable, disable, or make no change to the serial
lookup.
CSS
Parameters
Secondary
DNS Server
Add (Hostname or IP
Address)
Enter the hostname or an IP address of a secondary server, that you
want to add.
A maximum of two IP addresses are allowed. The order in which you
enter them is the order in which they are used if the primary DNS
server fails.
Separate multiple addresses with a comma.
Remove (Hostname
or IP Address)
Enter a hostname or an IP address of a secondary server, that you want
to remove.
A maximum of two IP addresses are allowed.
Separate multiple addresses with a comma
NAM
Parameters
Disable
Nameservers
Select to disable domain name servers.
Group Sub-Group Field Description