Filter
Top Products
11-20
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Managing Command Sets
The Command Sets window appears.
Step 2 Click Create in the Command Sets window.
The Select Device Category window appears.
Step 3 Enter the name of the Command Set in the Name field and a description for the Command Set in the
Description field.
Step 4 Select the type of device from the Device Type Selector.
Step 5 Click Next to continue.
The Select Commands window appears.
Step 6 Select the command or commands you want to assign to the selected device or group of devices from the
Available Commands pane in the Select Commands window.
• Select All Commands from the Commands Selection drop-down list to list all the commands
available for the device or group of devices.
• Select Common Commands from the Commands Selection drop-down list to list only the common
commands.
If you have a device category with no commands, it will not be considered for populating the Common
Commands list.
Step 7 Click Add to add the selected commands.
The commands move to the Selected Commands pane in the Select Commands dialog box.
Step 8 Select commands from the Selected Commands pane and click Remove button to delete command(s)
from the Selected Commands pane.
If you want to enter adhoc commands:
a. Enter them in the Adhoc Commands text box and click Add Adhoc.
The adhoc commands) are added in the Available Commands pane.
b. Select thecommands that you want to assign from the Available Commands and click Add.
See Adding and Deleting Adhoc Commands for more details on Adhoc Commands.
Step 9 Click Finish to create the new Command Set.
A message appears: Command Set Command Set name created successfully.
Step 10 Click OK.
The new Command Set appears in the List of Command Sets in the Command Sets Page.
Editing Command Sets
You can edit Command Sets using this feature. You can edit only user-defined Command Sets.
To edit a Command Set:
Step 1 Select Resource Manager Essentials > Tools > NetShow > Command Sets.
The Command Sets window appears with the List of Command Sets.
Step 2 Select the name of the Command set in the List of Command Sets and click Edit.