Filter
Top Products
9-77
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
Web User Task
You can use the Web User configuration task to configure the web user for NAM devices. This is a
system-defined task. For more details, see
Table 9-3.You can enter the details of this task in the Web User
Configuration dialog box. (To invoke this dialog box, see Starting a New NetConfig Job.)
For the features of system-defined tasks and a description of the features of a system-defined task dialog
box, see
Understanding the System-defined Task User Interface (Dialog Box).. The fields in the in the
Web User Configuration dialog box are:
IPSec Transform
Set Configuration
Note: Only for IOS
12.1 and higher.
Action Select a required option to add, remove or make no change
to transform set configuration.
This sub-group of fields is applicable only to IOS version
12.1 and above.
Transform Set
Name
Enter a name for the transform set.
Auth Header Select the type of authentication algorithm.
ESP Encryption Select the type of encryption algorithm with ESP.
ESP Authentication Choose type of authentication algorithm with ESP.
IP Compression Select to use IP compression with LZS algorithm.
This cannot be selected alone.
Transport Mode Select the mode of transport.
PIX Parameters
Security
Association
Configuration
Seconds
[120-86400]
Enter the number of seconds that will be used for
negotiating IPSec SA.
The value must be between 120—86400 seconds.
Kilo Bytes Enter the amount of traffic in kilobytes that will be used for
negotiating IPSec SA.
The value must be between 2560—536870912 kilo bytes.
IPSec Transform
Set Configuration
Action Select the required option to add, remove or make no
change to transform set configuration.
Transform Set
Name
Enter name for the transform set.
Auth Header Select the type of authentication algorithm.
ESP Encryption Select the type of encryption algorithm with ESP.
ESP Authentication Select the type of authentication algorithm with ESP.
IP Compression Select to use IP compression with LZS algorithm. This
cannot be selected alone.
Transport Select the mode of transport.
Group Sub-Group Field Description