Filter
Top Products
9-61
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
Group Sub-group Field Description
Common
Parameters
Action Select an option, to add, remove, or make no change to the
common parameters.
(Drop-down list) Select the required option for SNMP Groups/Users:
• Group & Users
• Group
• Users
When you select the Group option while adding task instances
for this task, the user fields will not be disabled. This is because
NetConfig needs the user information for configuring SNMP
group commands in Catalyst OS devices.
Group Name Enter the group name. Indicates the SNMP Group in the SNMP
protocol context.
SNMP Versions Select the SNMP version.
SNMP version 1 and version 2 have No Auth and No Privacy.
Version 3 has all levels of security.
Users *
- The entries in
the first row will
be updated in
Device and
Credential
Repository
User Names
Authen Pswds
Authen Algorithm
Privacy Paswds
• Username—Indicates the name of the user in the SNMPv3
protocol.
• Authenticating Passwords—Indicates that the user is part of
the group that is assigned Auth No Privacy or Auth Privacy
security level.
• Authenticating Algorithm—Indicates the authenticating
algorithm is assigned to a group with Auth No Privacy or
Auth Privacy security levels.
• Privacy passwords—Indicates user is part of a group
assigned Auth Privacy level of security.
You can specify up to five usernames, enter authentication
passwords, select the authentication algorithm and specify the
privacy passwords.
Config Access
Control
[optional]
This section allows you to configure access options for an SNMP
group.
Read View Specify the read view. This view can be viewed by users
assigned to a specified group. Indicates an alphanumeric label,
not exceeding 64 characters, for the SNMP view entry you are
creating or updating.
Write View Specify the write view. Allows all users in the specified group to
add, modify, or create a configuration.
Notify View Specify the notify view. This view notifies all the users in the
specified group.
IOS Parameters Access Control
(optional)
Access List [1-99] Enter the number of an Access List (1—99).