Filter
Top Products
8-44
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Configuration Quick Deploy
Configuration Quick Deploy
You can create an immediate job to deploy the version of configuration being viewed on the device. You
can deploy the configuration either in overwrite or merge mode.
Features of Configuration Quick Deploy
The following are the features of Configuration Quick Deploy:
• It can be performed for both running and startup configuration of all categories of devices.
• The job is executed immediately. Therefore Job approval should not be enabled at the time of
Configuration Quick Deploy.
• The jobs cannot be rolled back.
• The jobs use TFTP, Telnet, SSH, scp, rcp, https transport protocols.
• It provides an option to select either merge or overwrite mode when you deploy configuration on a
device.
• It cannot be performed for VLAN configurations. However, you can deploy VLAN configurations
using the CLI command,
cwcli config put. See Overview: cwcli config Command for more
information.
• It is supported for configuration versions in the archive only. That is, you cannot deploy for
configuration version available on a device.
• The jobs use the same protocol order that you have specified in the Config Transport Settings
(Resource Manager Essentials > Admin > Config Mgmt).
Performing a Configuration Quick Deploy
You can perform a configuration quick deploy using the Config Viewer window.
For example, you can launch Config Viewer window by clicking on Startup configuration or Running
Configuration links while performing tasks such as generating Out-Of-Sync Summary report, viewing
the Version Summary report etc.
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
Step 1 Click Deploy on the Config Viewer (Understanding the Config Viewer Window) window.
The Job Option Details dialog box appears.
Step 2 Enter the following information: