Filter
Top Products
11-26
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Using cwcli netshow Command
Step 8 Click Next.
The View Job Work Order page appears with the Job Work Order.
The Job Work Order contains general information on the job and on the:
• Job policies.
• Job approval details (if you have enabled job approval).
• Device details.
• Command Sets and the commands to be run.
Step 9 Click Finish after you review the details of your job in the Job Work Order dialog box.
A message appears, Job ID created successfully.
The newly created job appears in the NetShow Job Browser.
Using cwcli netshow Command
You can invoke Netshow features from Command Line Interface (CLI).
The cwcli netshow command let you use NetShow features from the command line. You can use the
cwcli netshow
commands to view, browse, create, delete, and cancel NetShow jobs and Command Sets.
This command is described in the cwcli framework chapter. For details see the topic Running cwcli
netshow Command in the section Overview: cwcli netshow Command.
Administering NetShow Settings
NetShow supports the following Administration options in RME:
• Configuring Job Policies
• Setting Log Levels
• Assigning Approval Lists
• Setting Up Job Approval
• Generating a Standard Audit Trail Report
Execution
Specify the order in which the job should run on the devices.
• Parallel—Allows the job to run on multiple devices at the same time.
By default, the job runs on five devices at a time.
• Sequential—Allows the job to run on only one device at a time.
Maker Comments This field appears only if you have enabled Job Approval Policies for NetShow. Enter the Maker
Comments. See
Setting Up Job Approval for more details on enabling Job Approval Policies.
Maker E-mail This field appears only if you have enabled Job Approval Policies for NetShow. Enter the Maker E-mail
address. This is mandatory. See
Setting Up Job Approval for more details on enabling Job Approval
Policies.
Field Description