Filter
Top Products
A-79
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
Software Management
SWIM1069 Feature subset of the
running image cannot be
determined. Select a
different image.
This is a wrong message due
to a bug. The correct message
is:
Feature subset of the selected
image is a subset or equal to
running software feature set.
None.
SWIM1070 Feature subset of the
running image cannot be
determined. Select a
different image.
This is a wrong message due
to a bug. The correct message
is:
Feature subset of the selected
image is a subset or equal to
running software feature set.
None.
SWIM1071 System software analysis
failed.
Some unknown error has
occurred during image
analysis.
Please contact Cisco TAC with the UI log
available under:
Windows:
CSCOpx\logs\swim_debug.log
Solaris:
/var/adm/CSCOpx/log/swim_debug.log
SWIM1072 Boot loader analysis failed. Some unknown error has
occured during analysis of the
image.
Please contact Cisco TAC with the UI log
available under:
Windows:
CSCOpx\logs\swim_debug.log
Solaris:
/var/adm/CSCOpx/log/swim_debug.log
SWIM1074 The selected image does
not have any requirement
to be analyzed.
The image can be used to
upgrade the device.
None. None.
SWIM1075 Cannot find an image that
is newer and can fit on the
Bootflash.
None. Add Bootloader images, to the Software
Repository, with version greater than the
running image version and that can fit into the
Bootflash. Then retry the job.
SWIM1076 Cannot find a Read-Write
Boot partition on the
device.
Read-Write Boot partition is
not available on the device.
Insert a read-write Bootflash on the device
and update the inventory.
Message-ID Error Message Probable Cause Possible Action