Filter
Top Products
8-88
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Baseline Template
or
a. Click Browse.
The Server Side File Browser dialog box appears.
b. Select the XML file.
c. Click OK.
Step 4 Click OK.
A message appears, Template successfully imported.
Step 5 Click OK.
The imported file appears in the Baseline Templates window with the description, Imported baseline.
Deleting a Baseline Template
To delete a baseline template:
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
Step 1 Select Resource Manager Essentials > Config Mgmt > Archive Mgmt > Baseline Templates.
The Baseline Templates dialog box appears.
Step 2 Select one or more Baseline templates and click Delete.
A message appears, The selected Template will be permanently deleted.
Step 3 Click OK.
A message appears, Successfully deleted the template.
Step 4 Click OK.
The selected Baseline Template is removed from the Baseline Templates window
Note You can delete Example Templates.
Deploying a Baseline Template
When you add a new device of the same type to the network, you can use the existing Baseline template.
This template consists of two parts, command and values.
You can create configurations for any device of the same type to the network by specifying the values
for the variables in the Baseline template.
You can deploy Baseline template on the RME devices in two ways:
• User Interface (See Deploying a Baseline Template Using User Interface for the procedure.)