Filter
Top Products
12-62
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 12 Managing Software Images Using Software Management
Software Distribution
Reboot immediately
after download
Choose not to reboot (and reboot manually later) or to reboot immediately after download.
You cannot select this option, if you have selected the Do not insert new boot commands into the
configuration file option.
Note the following about this option:
• Does not apply to Cisco IOS SFB 2500/1600/5200 devices. These devices always reboot
immediately.
• Applies to Supervisor Engine I, II, and III only. Line cards reboot automatically.
• Does not apply to PIX devices managed through Auto Update Server (AUS).
Perform distribution in
Non-Installed mode
This option is only available if the selected devices have IOS Software Modularity images running.
This option allows you to choose whether you want to install the images in Installed or
Non-Installed mode. By default Software Management distributes images in Installed mode.
Do not insert new boot
commands into
configuration file
Do not insert boot commands into configuration file to reboot with new image.
You cannot select this option, if you have selected the Reboot immediately after download option.
Note the following about this option:
• Does not apply to Cisco IOS SFB 2500/1600/5200 devices. Configuration file for these is
always updated.
• Applies to Supervisor Engine III only.
Use current running
image as tftp fallback
image
If the running image is in the repository, select this option to place a copy in the TFTP server
directory. Uses this copy of image if reboot with new image fails.
Note the following about this option:
• Applies to Supervisor Engine I, II, and III only.
• Option is subject to your platform restrictions to boot over connection to server. Check your
platform documentation.
• Backup image is not deleted after upgrade. It remains in TFTP server directory so that the
device can find it any time it reboots
Back up current running
image
Select to back up the running image in software image repository before upgrading.
Applies to Supervisor Engine I, II, and III only. Line cards do not support upload.
On error, halt
processing of
subsequent devices
Select to stop the job if a download or reboot error on a device or a module occurs. The default is
to continue to the next device.
For sequential execution, if you do not select this option, upgrade for the next device begins.
For parallel execution, upgrade occurs in batches. On completion of the ongoing batch, subsequent
devices are not processed.
See the Job Summary page for details.
Field Description