Filter
Top Products
19-13
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 19 CLI Utilities
CWCLI
-input inputlist Applicable to all commands
except
compareanddeploy,
createdeployparamfile,
deploycomplianceresults, and
directbaselinedeploy,
You must enter -input inputlist to run commands, such as put
and import, on multiple devices.
The parameter, inputlist is a text file containing arguments for
each device. A line starting with # is treated as a comment.
For example, an input list file might look like this:
#comment line
-version version [-save] [-reboot] device_name
-version version [-save] [-reboot] device_name
-jobid createdeployparamfile Used to specify the job identifier of the previously executed
comparewithbaseline job.
-l createdeployparamfile,
directbaselinedeploy
Specifies the file to log the results of the command.
-listonly write2run Displays difference between the latest running configuration for
device in configuration archive and new configuration that is
generated, without downloading changes.
-m createdeployparamfile,
directbaselinedeploy
Specifies an email address to send the results of the command.
primary_pass import, put, write2run,
write2start, run2start,
start2run,
deploycomplianceresults,
compareanddeploy, reload
Specifies primary user name for connecting to device.
-primary_user import, put, write2run,
write2start, run2start,
start2run,
deploycomplianceresults,
compareanddeploy, reload
Specifies primary user name for connecting to device.
-reboot import, put After successfully pushing a configuration to a device, device
reboots. By default the device does not reboot.
For IOS devices, you must also specify -save to avoid losing
configuration changes when rebooting.
-save import, put Applies to Cisco IOS devices only. Performs a write memory
after pushing the configuration. The default is no write memory.
cwcli config arguments Applicable Commands Description